Items: 0 Subtotal:$0.00
Antique Tables
Regal
Technical Information: The information below is from page 19 of the 1928 Brunswick Billiard and Bowling Catalog, Brunswick-Balke-Collender Company.

Also available in a combination model, and in either 4 or 6 leg versions

Construction: Built with heavy 5-ply, built-up sides, faced with an excellent grade of Mahogany veneer and 4 x 3 3/8" top molding of compound construction. Legs made 5-ply lumber, carefully kiln-dried stock, strongly glued together and reinforced with glue blocks at corners.

Rigidity is secured by fastening the sides to the legs with maple dowels and bolts of heavy metal, and further strengthened by means of cross stretchers extending from side to side and end to end of table.

The wood finish of the Regal is carefully selected Mahogany with rubbed finish and inlaid with celluloid line.

The workmanship of this table is in keeping with the Brunswick standard of excellence, and offers a wonderful value to those seeking a medium priced unit of comparatively simple design.

Slate Bed: Consists of three pieces of the best quality slate of regulation 1" thickness, with all joints rigidly secured by brass dowels and sockets. Playing surface is entirely free from screw holes. If desired, slate bed of 1 1/2" thickness can be furnished

Cushion Rails: The cushion rails of the Regal table are made up of a 3-ply body, consisting of three layers of core woods of alternating grain glued together to insure the rails against climatic changes.

The tops of the rails are covered with a rail cap of solid American Walnut. The rails are securely fastened to the table with invisible cushion bolts. These bolts are covered with blind cushion rail facing built up of 5-ply compound construction faced with a good grade of Mahogany veneer.

Cushions: The Regal table can be equipped with any style Monarch perfect angle cushion.

Pocket Irons: The pocket irons are No. 6 style, countersunk in the ends of the cushion rails by means of brass sockets.